Needed low budget speaker stand for my backspeakers, so decided to make pair by myself. Don't have the plannings scanned but you don't propably need them. :)Started from cutting the pieces off from cross-glued wood (dunno proper english name)
Then drilled 4, 6mm wide holes for the wooden plugs that will hold up the pieces together. :)
Pluged in the 30mm x 6mm wooden plugs and some glue between the pieces and clamped them together.
Measured the places for the vertical pillars.
Used specialised tacks to mark hole places for bottom part of the stand.
Layed the filler to the pillars to get smoother end result.
Fitting the pieces together. Looking good. ;)
Sanded all the surfaces for paintjob
Doing some prime painting.
Now is the time to add the mat black color to the surface. :)
Decided to add rubben pegs under the bottom part.
Final shot after gluing all together.
Stand is now 90cm's high. Turned out pretty nice result. :) Going to make new one next weekend for other rear speaker.
Sorry for blurry pictures, only had my cellphone camera in use.
Remove this ad by registering or by logging in.
Login with your Facebook account to comment: