.:Info
Nick: Japala  Info
Age: 42
Location: Raahe

.:Projects by user

.:Albums

.:



Title: CNC
Created: 17.07.2010 19:09
Photos related to my cnc machine
4 mm thick baltic birch plywood.
4 mm thick baltic bi...
61 pieces in total.
61 pieces in total....
Eagle posing.
Eagle posing. ...
Some detail from behind.
Some detail from beh...
The whole thing is around 31 cm wide and 37 cm tall.
The whole thing is a...
My new vinyl cutter installed to the CNC mill.
My new vinyl cutter ...
Cutting the logo graphics
Cutting the logo gra...
The business end of the vinyl cutter.
The business end of ...
Good details...
Good details......
First set used.
First set used....
Metku Mame gaming cabinet "branded" with new vinyls.
Metku Mame gaming ca...
The chair being cut. 1 mm end-mill and Mach3 doing all the math.
The chair being cut....
The different parts that make up the chair.
The different parts ...
Front view.
Front view....
Chair from behind.
Chair from behind....
New home for my cell phone? :)
New home for my cell...
Made this for my mother. The sign says "Welcome" and it is going to be located on the front door. We'll propably paint this piece black and place a white board behind it...
Made this for my mot...
Mario cut from 12 mm baltic plywood. 4 mm cut depth with two separate passes. I used 3.175 mm one flute endmill for this one.
Mario cut from 12 mm...
Mario being cut for the Arcade project.
Mario being cut for ...
Oh joy, I have a CNC machine... waiting and some more waiting... ;)
Oh joy, I have a CNC...
Several projects going on at the same time...
Several projects goi...
Dremel Fortiflex as a motor and 3 mm ball endmill doing the cutting. Not the best possible source image (black and white rose) but good enough for testing out the machine.
Dremel Fortiflex as ...
Getting some wood carved.
Getting some wood ca...
Kitchen table in good use once again.
Kitchen table in goo...
My new baby ;) Currently operating with Proxxon 100W rotary tool but I believe I'll be replacing it with Dremel 300W Fortiflex and perhaps with Kress 1050W one if even more power is needed... Using Mach3 and operating directly via parallel port.
My new baby ;) Curre...