.:Info
Nick: s0lid  Info
Age: 27
Location: Tampere

.:Projects by user

.:Albums

.:

Uploaded: 07.03.2012 19:12
Categories: Full case

s0lid - There will be mods :)New Lanbox project.--HW-A8-3850-Asrock A75M-ITX-HD7750-8GB DDR3-2TB 3.5" HDD-2.5" SSD (tba)-Eithe

There will be mods :)
New Lanbox project.
--HW
-A8-3850
-Asrock A75M-ITX
-HD7750
-8GB DDR3
-2TB 3.5" HDD
-2.5" SSD (tba)
-Either a 350W SFX psu or 500W ATX psu, which ever fits.
-Cooling (tba)
-Pci-e x16 flexriser
-Apple hdmi-dvi cable (you'll see why ;))

--Teh plan
-Fit lanbox into U.S.Army .50cal Ammobox (id: 27.8x14.4x17.5cm LxWxD)
-Build a insert for the parts from 1.5mm steel sheet
-I/O will be facing up, since lid of the ammobox is easily removeable
-Not a single change to the ammobox itself


Remove this ad by registering or by logging in.

Remove this ad by registering or by logging in.




Login with your Facebook account to comment:



11.04.2013 17:51 alfonsIts not .50 cal box but 5,56mm! Real nice idea though :)
09.03.2012 08:20 s0lidYep, good thing i picked board that got pretty flat i/o area (no wlans, s/pdiffs) also from 10mm the border of lid there's ~7mm of extraspace space. The ammobox is 19cm high in total :)
09.03.2012 00:00 Zesti175mm deep box and mITX is 170mm.. That's going to be nice and tight fit. :)
08.03.2012 10:27 s0lidI really doupt it will work in a Lanbox 1) too much weight. 2) Actually getting the chassis so sealed that it won't leak even it were upside down. Such as I/O area and HDDs do not like mineral oil 3) And I doupt the power dissipating characterics of that steel chassis would be enough for 100W cpu and 75W GPU + stuff.
08.03.2012 05:08 isthejakemaybe watertight the whole thing and submerse all u can in mineral oil?
07.03.2012 20:08 s0lidYeah an ATX PSU will fit without its chassis and when it's installed vertically, I just don't have a unit that I'd like to use for this project at the moment. Antec SP 500W (s0lid edition) would work but it's internals are too high -> Can't fit hdd. Also got modular 650W TT unit that got 12cm fan in it -> internals are low enough but it's too "good" for this project :)
07.03.2012 19:50 DJanneatx psu shuold fit when u mod it littlebit