.:Info
Nick: drakmin  Info
Age: 30
Location: Tampere

.:Projects by user
  • Embryo Zero
  • Diy screen for projector
  • Scifi binoculars for a movie project

    • .:Albums
    View all albums

  • Default
  • Embryo Zero
  • Ghettoblaster
  • Ghettoblaster 2012
  • Ghettoblaster V.2
  • Home theater
  • Interior design
  • Megablaster 2010
  • Movie project
  • Nanoblaster
  • New apartment
  • Newest apartment :)
  • Seas L26ROY sub

    • .:


    Title: Megablaster 2010
    Created: 25.01.2010 21:16
    4th ghettoblaster
    I forgot to upload this image last year. Nowadays this blaster has third 7,2V nimh pack. 20-24V overall voltage. (almost 3x8V when batteries are full)
    I forgot to upload t...    		 Casualties after the first day of use. Epoxy failed, replacing with contact glue.
    Casualties after the...    		 Line level high pass filter set to 70hz/6db pre octave.
    Line level high pass...    		 95% finished.
    95% finished....
    Maybe this time with a bit more low tech battery type :D (2x 7,2V 4500mAh Ni-MH)
    Maybe this time with...    		 Small progress, mask for the leds. No wood will be visible to the outer world.
    Small progress, mask...    		 acryl plates seem to fit
    acryl plates seem to...    		 Acryl plates ready to be glued.
    Acryl plates ready t...
    :D
    :D    		 scanner running
    scanner running...    		 Here's how electronic parts will be placed.
    Here's how electroni...    		 Here's the size difference how it really looks like. Gray blaster which has article over metku.net would fit between these sizewise.
    Here's the size diff...
    My little sister trying to give the box a scale.
    My little sister try...    		 http://allthemods.com/userinfo.php?userid=25&id=6784
    http://allthemods.co...    		 I think wooden parts are now finished.
    I think wooden parts...    		 I think I'll try to do it with chrome grilles ;D
    I think I'll try to ...
    Sound test: http://www.students.tut.fi/~hakala52/mankkatesti.mp4
    Sound test: http://w...    		 End of day 3.
    End of day 3....    		 Fitting the K.I.T.T scanner.
    Fitting the K.I.T.T ...    		 More bracing. Should be pretty light and stiff.
    More bracing. Should...
    Testing the crossover, worked okay! :D
    Testing the crossove...    		 Building the case. Battery compartment on the left.
    Building the case. B...    		 First day of work.
    First day of work....    		 Drivers in a cardboard model.
    Drivers in a cardboa...
    18,5V / 5,8Ah Litium Polymer battery and charger.
    18,5V / 5,8Ah Litium...    		 K.I.T.T
    K.I.T.T    		 2x8" visaton bass + horn tweeter 94db/w 85-20000 FINAL PLAN all parts ordered.
    2x8" visaton ba...    		 2x8" visaton bass + horn tweeter 94db/w 85-20000 FINAL PLAN all parts ordered.
    2x8" visaton ba...
    2x100w tk2050 amp up and running.
    2x100w tk2050 amp up...