.:Info
Nick: deaam  Info

.:Albums
View all albums

  • Default

    • .:
    User info:
    Full name:
    Homepage:
    Age:
    Location: ,
    Bio:



    Default album
    Sleeving and soldering, took about 20H to solder and sleeve it completly. Next thing im planning to do, is to solder Heatpipecooling from the Zalman PSU, to my XFX, i will just basically solder the pipe to the alumium heatspreaders.
    Sleeving and solderi...    		 Pretty much the final layout inside, i will get some nice 2,5" mount for ssd, All wires soldered to right lenght and sleeved, even tought phobya sleeve isnt so high quality, but im still satisfied with the finish!
    Pretty much the fina...    		 From diffrend angle. Hardware used in this project; -Core i3 2100 -Asrock H61 M-ITX -4GB DDR3 Corsair 1333MHz -Ocz 60GB SSD -Evga GTX460 with Prolimatech MK-13 and Coolink fans -XFX 450w -Antec kuhler 620 CPU cooler with Phobya 20mm Shroud and Noiseblocker Blacksilent PL2 fan in "pull" configuration -Base of the case is "Antec Aria", wery old antec's mATX "htpc" style case, but as you can see i will be using only the main constracture, since the side-/frontpanel(s) will be made from 3mm thick aluminum -For casefan i use 900 RPM Noiseblocker Blacksilent -all fans are controlled by Akasa FC trio
    From diffrend angle....    		 Still in process.. The PSU not shown in the picture, it's on my table waiting to be sleeved, wires to be shortened and few tricky mods which will be shown later on ;) The PSU i will use is XFX 450w and will be placed on the bottom left fan, so the fan will such air throught the antech kühler 620 radiator blowing it out of the PSU's back.
    Still in process.....